Uncle Sam Does It Again!!

Uncle Sam Does It Again!!
On Dec. 22, 2010, the Occupational Safety and Health Administration (OSHA) issued an "instruction" that cancels OSHA's interim enforcement policy on fall protection for certain residential construction activities, replacing it with new compliance guidelines.
The new instruction essentially eliminates the option of using slide guards in residential construction on roofs with slopes of up to 8-in-12. Employers now must instead use safety nets, guardrails or personal fall-arrest systems on residential construction projects where the slope is greater than 4-in-12 and the potential for a fall from one level to another is 6 feet or greater.
This is just another example of big government’s BS and meddling in things they don’t have a clue about.
Can you see a roofer using a rope and harness to roof a 5/12, one story house? Come On Man!!!

Why Do I Need A Roof Moisture Survey

Many roofs need to be replaced prematurely due to moisture damage from leaks and improper installation. Roof moisture surveys have a proven track record in finding damaged portions of roofing structure so they can be repaired before water damage rots your whole roof. Moisture Surveys locate the moisture your roof may be absorbing or is failing to keep out of your building. Areas of roof moisture contamination can be nebulous in shape and sometimes mottled in appearance, although they are commonly found in linear or puddle-like shapes. A moisture survey is the perfect application to inspect your roofing system for water or moisture. Moisture surveys are an accurate, cost-effective technique for detecting moisture damage in roofing systems. The survey pinpoints the extent of moisture damage and wet insulation within the roof. Surveys are used world-wide by building managers, facility managers, property managers, plant engineers and government agencies to accurately locate and quantify moisture trapped within commercial roofing assemblies. This is an ideal way to pinpoint what areas of the roof are retaining moisture which can lead to future problems. It is important to determine the source of moisture quickly and accurately and to identify areas for remediation and control.
Electronic moisture meters use a non-destructive technology to measure moisture. During operation, low-frequency signals are transmitted into the material being tested to measure the change in impedance caused by the presence of moisture. This reading is translated by the instrument into a moisture content reading. The resulting readings, properly interpreted can be used to assess areas of potential moisture. The findings are then verified by core samples.
 A roof survey may also provide valuable information when a roof of any type is suspected of leaking. The survey can help to pinpoint troubled areas in need of attention. By locating the areas with the highest moisture, remediation efforts can be focused on the areas needing immediate attention and reduce the impact of mold proliferation.  Todays building owners save hundreds of millions of dollars annually with scheduled roofing inspections.  Call today for a free quote for nondestructive testing of your roof. Our inspection teams precisely mark out the damaged areas on the roof surface, so you can save tens, even hundreds of thousands of dollars in unnecessary repairs or replacement. Because the work is conducted during the day, scheduling and safety concerns are minimized. This report can be used in repair specifications with confidence. Electronic leak detection pinpoints breaches in roof and waterproofing membranes for less expensive, faster, safer, and more reliable testing than conventional methods.
Dorsey Roofing is recognized by Firestone Building Products as a "Red Shield Contractor" ,we have partnered with the best in the business to deliver the highest quality products. Firestone-licensed contractors annually earn status by accumulating Quality Points for achieving exceptional inspection ratings on Firestone Red Shield warranted roofing system installations.

Specializing in commerical roofing, Dorsey meets the commercial roofing needs of businesses in the DFW Metroplex.  After talking to you and a thorough evaluation of your roof, our expert roofing team will recommend a scope of work that best suits your budget and roof structure. We've gone through extensive training on the best products and solutions with the top manufacturers in our industry so we can assist you with our knowledge base to make the best decisions possible for your business.

 Licensed, bonded and insured, full service professional roofing contractor providing new construction; re-roof maintenance/repair, and waterproofing services for commercial projects.
Call Dorsey when you need commercial roofing.

New ASTM Stanards for TPO

Currently, there are at least six manufacturers of TPO roofing membrane in the United States as well as several marketers. Until recently, there has been no ASTM standard established for TPO reinforced roofing membrane. The approval and release of an ASTM TPO standard has defined minimum physical properties of the membrane, providing needed standardization to the industry.


TPO is one of the latest single ply, flat roofing materials on the market. TPO is the fastest-growing segment of the commercial roofing industry. Architects and owners alike have learned of TPO's superior weathering ability and exceptionally reliable heat welded seams.

Make an appointment for a free estimate of your reroof, new roof, or repair.

Firestone Building Products U.S. - Video

Nobody Covers you Better! A Building Owners Must See!

Firestone Building Products U.S. - Video

Solar Roof Shingles

Solar Roof Shingles

Solar Roofing Shingles are Gaining Popularity in New Residential Construction

By Mark J. Donovan

New solar roof shingle technology is accelerating in popularity with builders of large housing developments and homeowners alike. In sunny regions of the country, or where electric utility costs are high, solar roof shingles can provide dramatic electric utility cost savings.
Solar roofing shingles , also known as “Building-Integrated Photovoltaics” or BIPVs, integrate solar cell technology into asphalt shingles as well as slate, metal, tile and other roofing products. 

At the heart of the solar roof shingle technology is a photovoltaic (PV) semiconductor layer that is laminated to the shingles’ surface. The solar roofing shingles convert the sun’s solar rays into electricity that the home uses. If the solar roof shingles produce more electricity than is consumed by the home, the energy can either be stored in batteries for later use, or more often, fed back to the electric company for an energy credit. When the excess electricity is fed back to the public utility, your electric meter actually turns backwards.
Solar roof shingles look very similar to standard asphalt roof shingles both in size and appearance, and are aesthetically much more attractive than roof mounted solar panels. Many have a deep dark bluish/purple appearance and blend in well with existing asphalt roof shingles. The manufacturer SunPower also offers them in a black appearance.

Depending upon the home’s electrical needs, all or only a portion of a roof need be shingled with solar roof shingles. If a partial roof installation is all that’s required, the solar roof shingles will integrate smoothly into the standard asphalt roof shingle areas.

Solar roofing shingles are installed similarly to traditional asphalt shingles however they should only be installed by a roofing professional or electrician who has been trained by the particular solar roof shingle manufacturer. Besides having to properly install them, the roofer or electrician also needs to run wires behind the roof sheathing and into the attic space.

From there the wires are connected together and sent to an inverter box that converts the DC voltage to AC voltage. The AC voltage can then be fed into the home’s electrical system and/or onto the utility grid. The material and installation costs for installing solar roof shingles is still much hirer than standard asphalt roofing shingles, however they are falling. In addition, the electric utility costs savings can be dramatic depending upon the amount of sun your home’s roof is exposed to and/or the cost of electricity in your local area.

Also, the federal government offers a 30% tax credit, or up to $2,000 in savings, on the cost of installation. Typically you can expect to see a return on your investment within 5 to 10 years, however this number is a function of how much sunlight your roof is exposed to and the cost of energy in your local area.

The average single solar roof shingle with approximately 3 square feet of exposure can only produce 50 watts of power, enough to run a low wattage incandescent light bulb on a sunny day. However when hundreds of square feet of roof surface is covered in solar roof shingles, combined they can produce enough electricity to run an entire home. The standard rule of thumb is that a home requires 1KW (1000 watts) per every 1000 square feet of living space. Consequently on a 2,000 square foot home, approximately 120 square feet of solar roof shingles are required. The cost of installing a 2KW solar roof shingle system is estimated to be around $15 - 20K, before applying for the federal tax credit.


Warranties for solar roof shingles range from around 15 to 20 years and are designed to withstand rain, snow, and wind. Most solar roof shingle manufacturers state that their shingles can withstand 80 MPH wind loads. Solar roof shingle manufacturers include OkSolar, Uni-Solar, SunPower, Solar Components Corporation, Dow Chemical and Atlantis Energy Systems. Atlantis Energy also offers a roofing product called BITERS that delivers both electricity and hot water to the home. So if you are planning to build a new home you may want to take a closer look at solar roof shingles. They can provide your home with both weather protection and clean electricity, and can dramatically reduce your energy bills. In addition, as electric utility costs continue to rise and solar roof shingles conversely fall in price, the time for seeing a return on investment continues to shrink.

Home Contractors: Tip-offs to Potential Rip-offs - BBB News Center

Whether you are planning a small repair project, like repaving your driveway, or a more extensive project, like adding a family room to your home, it pays to look beyond the lowest bid when selecting a contractor.

Right from the start, you can eliminate what are likely to be less-than-reputable contractors by considering a list of traits common to rip-off artists. Both the Federal Trade Commission and the Better Business Bureau have found the following to be indications that a contractor may not be interested in satisfying customers:

  • Solicits door-to-door: Be suspicious of contractors who attempt to gain business by visiting door-to-door. "Cold calls" can sometimes mean that the contractor is not from a local, established business but is instead just passing through and trying to make a quick buck.
  • Has materials left over from a previous job: It is not your lucky day when a contractor shows up on your doorstep offering a cut-rate price on a project because they have materials left over from a recent job at your neighbor’s house or the house “down the street.” This is a common ploy of fly-by-night operators or handymen who are based out-of-state and use their pick-up trucks as their place of business.
  • Asks you to get the required building permits: This could be a sign that the contractor is hoping to avoid contact with the local agency that issues such permits. Perhaps he is not licensed or registered, as required by your state or locality. A competent contractor will get all the necessary permits before starting work on your project.
  • Does not list a business phone number in the local directory: This can be a red flag indicating that the contractor does not have an established business presence in-state. Or, that he perhaps relies on a home answering machine to “screen” customer calls.
  • Pressures you for an immediate decision: A reputable professional will recognize that you need time to consider many factors when deciding which contractor to hire. You will want to check references; look into the contractor’s standard of work and his professional designations and affiliations; verify his insurance; check to see if he needs a license (and if so, that it is valid); get written estimates from several firms based on identical project specifications, and, contact the Better Business Bureau and local consumer protection agency to see if they have information.
  • Asks you to pay for the entire job up-front or demands only cash: Payments should be by credit card of check so that your credit card statement or cancelled check can provide proof of payment, if needed. If you are asked to pay for the entire job up-front, this should raise a red flag. Final payment should not be due until the job is done. Do not make the final payment or sign an affidavit of final release until you are satisfied with the work and have proof that the subcontractors and suppliers have been paid.
  • Suggests you borrow from a particular lender: Do not agree to financing through your contractor or someone he suggests. Many people have been ripped off when they agreed to use the suggested lender; sign a lot of papers in a rush; and find out later that they had agreed to a home equity loan with a very high rate, points and fees. Secure financing on your own by shopping around and comparing loan terms.

Home Contractors: Tip-offs to Potential Rip-offs - BBB News Center

Dorsey Roofing When You Want it Done Right!!

Dorsey Commercial Roofing: TPO The Smarter Choice

Dorsey Commercial Roofing: TPO The Smarter Choice